DLA-X5000 & X9000 Projector: Things Look Brighter for JVC

Having not released any new models in 2014, JVC is back in the home theatre projector game with a pre-IFA announcement of the company’s latest D-ILA projectors. Positioned as direct successors to the critically-acclaimed DLA-X500R, DLA-X700R and DLA-X900R respectively, the 2015 JVC trio of DLA-X5000, DLA-X7000 and DLA-X9000 adds HDR (high dynamic range) compatibility, greater light output, HDCP 2.2 compliance and 4K@60Hz at 4:4:4 chroma sampling thanks to a new high-power lamp and 18Gbps HDMI 2.0 chipset.

JVC DLA-X9000

We spent some time with pre-production units of the X5000 and X9000, and walked away very impressed indeed. We will save the full calibration charts and measurements for when we get our hands on a production sample, but here’s what we found so far.

Black-level reproduction has long been the forte of JVC’s DILA projectors, and the pair of new JVCs didn’t disappoint. There’s projector black, then there’s JVC black: watching the projected light from the DLA-X5000 disappear into an abyss of nothingness (especially with dynamic iris enabled) on a full-black screen was truly a sight to behold. And just when we thought things couldn’t possibly get any better, along came the DLA-X9000 with its superior optical components to generate the projector-world equivalent of OLED blacks.

The Dark Knight

The benefits of higher lumens rating were plain to see too: mid-bright and bright images popped with the sort of vibrancy and punchiness that’s traditionally more the domain of Sony and Epson projectors. While we weren’t supplied with HDR material to audition on this occasion, given the outstanding dynamic range on show, we have no reason to believe the JVC X5000 and X9000 won’t do full justice to such content.

The picture menu on the upcoming JVCs was largely similar to the one implemented on outgoing models, though we did spot several changes. First was the motion processing which is now categorised under [Blur Reduction] with two further submenu options of [Clear Motion Drive] and [Motion Enhance]. The soap opera effect (SOE) introduced by the least aggressive [CMD] setting appeared more subtle than before, but engaging [Motion Enhance] added unmistakable edge enhancement to moving objects – the thick halos and ringing would evaporate before our very eyes once we hit the pause button.

[Blur Reduction] [Colour Management]
[Blur Reduction] submenu [Colour Management] submenu

Delving into the colour management system (CMS), we noted the removal of [Orange] adjustment control which some calibrators might have used to tweak skin tones particularly with extended colour space. Talking of which, the JVC DLA-X5000 pre-pro unit managed to cover 89% of DCI-P3 colour gamut standard:

DCI-P3 coverage

…although the wide colour gamut would be applied to Rec.709 content too, so we chose to improve the sub-100% saturation tracking during calibration at the expense of 100%-sat primaries:

Saturation tracking

Perhaps a production model may feature better colour remapping. Also having room for improvement was gaming responsiveness – we clocked input lag figures of around 140ms on both the JVC DLA-X5000 and DLA-X9000 using a Leo Bodnar tester.

Input lag

The provision of [THX] picture preset gave the X9000 a distinct advantage over the step-down X5000 when it came to 3D playback – we’ll provide feedback on a specific issue to JVC to see if the playing field can be levelled by the time retail units hit store shelves. If not, it may be worthwhile paying extra for the THX-certified DLA-X7000 or DLA-X9000 if extra-dimensional performance is important to you.

Interstellar

The onboard eShift-4 technology exhibited better image stability than the previous iteration, but we still preferred disabling it for pristine 1080p material like Blu-ray movies.

Final Word

After essentially skipping 2014, things are looking brighter for JVC from what we’ve seen of the DILA X5000 and X9000 pre-pro samples, although as always we’ll reserve full judgement until we can run our full array of tests on production units when they arrive in November.

9 comments

  1. Vincent, hi this is Jason, thank you for the early preview. Can you provide any additional insight on the color issue in 3D mode on the 5000 vs. the 9000? Your site is one of the few that focuses on 3D color performance in the reviews which is much appreciated.

  2. @Jason: It’s not colour, but a specific picture processing that’s forced in 3D – thus spoiling the image – on all picture modes except [THX]. Sorry I can’t reveal more, but JVC are aware of it, and hopefully will act on it.

    Warmest regards
    Vincent

  3. Great preview. I wonder if this projector (or any projector for that matter) is able to display the same contrast (or black levels) as last gen Kuro or OLED display. Or because of the basics of projection systems that will be simply impossible. Thank you.

  4. 139ms!? Oh no, I was holding out for this year’s JVC release in the hope that they would provide a gaming mode with less lag. I like to game with the kids, and though not particularly competitive, anything over 100ms really makes gaming feel horrible.
    I’m so disappointed!

  5. When you review the models can you check for corner brightness issues and vertical streaking, use the Oppo splash screen to check for streaking, I believe past projectors have suffered from internal reflections due to E-Shift, a problem that also afflicts the recent Epson laser projector, I would prefer they ditch E-Shift to solve this issue.

  6. Did you measure the input lag with “Game mode” enabled? Or just using the standard or THX modes?

  7. @John Nemesh: There was no [Game] mode on the pre-production models I tested – all the other picture modes including [THX] yielded similar results.

    Warmest regards
    Vincent

  8. Hello Vincent,

    Thanks for this great preview. Any idea when you might get a production unit of one (or more) of these and publish a full review?

  9. @Manni: It will be mid- to late-December.

    Warmest regards
    Vincent