Offloaded the Samsung LE40M86BD today… can’t help but feel a twinge of sadness because this panel has truly been outstanding. Anyway, here are our post-calibration settings for HD over HDMI in a dimly lit environment. Usual caveats apply: using our settings on your own LE40M86BD/ LE40M87BDX by no means guarantee an accurate picture due to different ambient light level, different input source; there may be intra-model variations, or you’re simply used to (and prefer) non-D65 images.
Picture Submenu
Mode: |
Movie |
Contrast: |
90 |
Brightness: |
50 |
Sharpness: |
30 |
Colour: |
51 |
Tint: |
50 |
Colour Tone: |
Warm2 |
Backlight: |
1* |
Size: |
Just Scan |
Digital NR: |
Off |
Active Colour: |
Off |
DNIe: |
Off |
Movie Plus: |
Off |
Detailed Settings
Black Adjust: |
Off |
Dynamic Contrast: |
Off |
Gamma: |
-1* |
Edge Enhancement: |
Off |
Colour Space: |
Wide |
xvYCC: |
On |
White Balance
R-Offset: |
17 |
G-Offset: |
15 |
B-Offset: |
11 |
R-Gain: |
4 |
G-Gain: |
14 |
B-Gain: |
30 |
Setup Submenu
Energy Saving: |
Low |
HDMI Black Level: |
Low |
Footnote
- Backlight could be increased up to 4 to boost shadow detail or in brighter environment, but absolute black level will be higher and clouds may be visible
- Similarly, gamma can be increased up to +1 at the expense of image contrast
Please Support Us
As per our readers’ requests here and here, a Paypal donation button has been set up. If you like the above settings or simply want to thank us for the hard work we put into our no-holds-barred reviews, feel free send a couple of quid our way, which will be used to buy more HDTVs:
Show All Comments